How are you all doing? Summer is officially underway and this week’s Orchard Outlook continues with key reminders. After the dry weather in June, consider activities that benefit moisture retention. The start of July signals that the fruit cuticle is protected enough to consider Folpan/Follow as a fungicide. We also remind you that rubbing alcohol is not an adequate sanitizer against fire blight bacteria on tools. If you've used the new thinners Brevis or Accede, take a look at examples of minor leaf injury but note there is no concern for tree health based on the symptoms observed. On-farm nursery growers will find a few tips for upcoming activities. As always, thank you to the Orchard Outlook Committee for their continued dedication and contributions.

Weather

2026 Degree Day Accumulations

The cumulative degree days are maintaining the same trend as the last few weeks by being ahead of the 10-year average and close to the 5-year average (Figure 1). The 5-year average represents warm growing seasons on record so this year would also be considered a warm growing season.

Figure 1: Heating degree day accumulations for plant (above 5°C) and insect (above 10°C) development from March 1 to June 29 for the past 17 seasons. Provided by Harrison Wright (AAFC Plant Physiology).

Approximately 3% less plant development heat units compared to the 5-year average, and 4% more compared to the 10-year average.
Approximately 5% less plant development heat units compared to 2025, and 6% less compared with 2024.
Approximately 5% less insect development heat units compared to the 5-year average, and 3% more compared to the 10-year average.

2026 Precipitation Update

Harrison Wright says, "We are continuing our sawtooth pattern of alternatively being either well above or well below the precipitation monthly averages. We received less than 50% of the June monthly average." (Figure 2).

Recommendations:

Applying mulch early in the season while the soil has moisture is more effective at retaining moisture than waiting until midsummer. Apply a herbicide first.
Explore using straw mulch, in particular in areas of sandy knolls or on lighter soils where trees struggled last year. Apply to a depth of only a few centimetres to simply provide a physical barrier that reduces evaporation from the soil surface. It also shields the soil from sun to lower the temperature and slows the impact from rain droplets to improve infiltration.
Alternatively, practice season-long mow-and-blow to move the laneway grass clippings into the tree row. Creating a few centimetres of grass clippings has a big benefit.

Figure 2: Monthly precipitation totals in 2026 (triangles) compared with the 25-year average (bar graphs). Provided by Harrison Wright (AAFC Plant Physiology).

Diseases

Apple – Scab

Where primary lesions are present, secondary infections have been occurring and will continue during wetting events of sufficient duration. The minimum wetting required for secondary infections is 3 hours less than the wetting required for primary infections.

Recommendations:

It has been 2 weeks since the ascospores were depleted, according to model predictions. Before you consider lengthening spray intervals, take a close look at the leaf canopy in the orchard to determine your risk of secondary infections. Lesions develop on the surface of a leaf and they are velvety brown in appearance. Check cluster leaves for early infections and the mature leaves on terminal shoot growth for mid season infections.
Monitor for extended or heavy periods of rainfall because most fungicide residues are washed off by a cumulative total of 50 to 60 mm of rain (2 to 2.5 inches). Summer diseases are a risk if spray programs are stretched to this limit.
If adopting a lengthened spray interval, once the 10-day interval has been reached it is better to re-apply fungicide protection prior to rainfall/possible infection rather than after.
Be aware of the re-entry periods on products for hand thinning. Captan has an REI of 15 days for high density plantings and 24 days for low-density plantings. Alternatively, the product Allegro is a quick re-entry product at only 24 hours but note the 28-day preharvest interval.
Folpan/Follow:

Should NOT be applied between tight cluster and 30 days after petal fall to avoid fruit russeting. If petal fall was on the first week of June, then you may consider using Folpan/Follow in the first week of July for this timeline to be satisfied.
Folpan/Follow becomes a good option in the summer weeks for scab control and protection from summer diseases.
Note the REI of 12 hrs for general activities and 6 days for hand thinning.
Folpan/Follow is considered a cousin to Captan and is similarly a hot product that has the potential to cause fruit russetting. Do not use Folpan close to oil sprays or products containing surfactants. Also, be wary of tank mixes with liquid nutrients that are formulated to maximize uptake.

Apple – Powdery Mildew

Powdery mildew infections can be expected when conditions are warm (10-25°C), humid and dry.

Recommendations:

Trees are susceptible to powdery mildew infections for as long as new leaves are forming on growing shoots (until terminal bud set).

On large and mature bearing apple trees, the main economical concern is in protecting fruit against infection. Fruit infection causes stunting and russeting. However, fruit are only susceptible to infection during and shortly after bloom. The russet stretches as the fruit expands. In early June there were possible infection periods when fruit might have been susceptible. Fruit are no longer at risk of infection.

Protection may continue on young plantings because severe infections can reduce shoot growth, which is most concerning for young, non-bearing orchards. Continuing protection this season will prevent infection of next year's buds (to protect next year's growth), and result in less carryover of inoculum to next year. Pay particular attention to susceptible and high-value varieties such as Honeycrisp and Gala. Product reapplication intervals can vary from 7-14 days.

There is industry resistance to group 11 products such as Flint so it should not be used for powdery mildew management.
To avoid resistance development, do not use any products with powdery mildew activity more than two times consecutively (without rotating to another chemical group with powdery mildew activity).

Fire Blight Infection Management

Industry-wide email alerts have concluded. If you have a situation with blossoms still present please contact me directly for blossom blight updates on an as-needed basis.

Recommendations:

Blossom blight infection symptoms are now visible.

Cut out infections when a period of 2 dry days are in the forecast. Leave prunings in orchard laneways to let dry thoroughly for several weeks. If cutting a whole tree consider letting it dry while attached to the trellis. Don’t make piles that will prevent the wood from drying. Do not work in trees when they are wet from dew.

As soon as you find fire blight infections, use an application of Apogee/Kudos (prohexadione calcium). Use a lower rate if trees have not filled their space or the full rate if tree growth is not an issue. The benefits of Apogee/Kudos:

Helps suppress the progression of infection to buy you time for cutting it out.
Builds protection in nearby trees that may not yet be infected so that if infection were to occur, the spread would be already slowed. Where infections are numerous, apply prohexadione calcium to the entire block considering that ooze can infect at a distance of at least 0.8 km away.
Reportedly has the potential to reduce or prevent canker incidence on perennial wood.

To save time, it is not necessary to sterilize the tools often as long as all of your cuts are in fire blight areas and during dry weather. Several research studies have concluded a lack of benefit from sanitizing tools. Where there is a tradeoff because of limited labour, it is best to work quickly rather than to sanitize tools.

If you insist on using a sanitizer, the general recommendation is one part bleach to ten parts of water. If bleach is too tough on tools, Lysol and Pinesol at one part product to ten parts of water are good alternatives. Do NOT use rubbing alcohol because even at 70% to 99% concentration it allows bacteria to survive.

Monitor for shoot blight on suckers that can infect the rootstock.

Do not break off branches with fire blight infections as you navigate the orchard. Research shows that the bacteria becomes systemic in the tree because branches are not adequately removed. There are then a high number of new infections and significantly more canker tissue and cankers on structural wood.

Prune out fire blight infections on young trees in the current year, don't wait for winter.

Remove fire blight strikes at least 2-4 ft below active infections to remove the leading edge of the bacteria. The younger the tree, the deeper the cut. Being aggressive at the first sign of symptoms will help prevent the re-occurrence of symptoms and the need for continuous cutting back. Repeat tree inspections.

If you feel confident that you can monitor the formation of a canker on a stub cut for later removal, then a stub cut may be appropriate. A 4-inch stub cut causes a canker to form on the stub before reaching structural wood like the leader of the tree. However, do not forget to remove the stub because otherwise the canker will serve as a source of bacteria. Mark the tree for revisiting.

Apple – Black Rot

Recommendations:

Based on our limited knowledge, the highest risk of infections is theoretically between petal fall and 4-6 weeks later.

A 10 hr wetting period at 16°C to 32°C allows infection.
The optimum temperature for infection is 20°C to 24°C.
There are few management options to cover such a long risk period.

Captan has activity but note the REI for orchard activities.
Merivon has activity but this group 7 + 11 product should not be used more than 4 times each year. Meanwhile, the short PHI and protectant activity are good to reserve for late season application for protecting apples being placed in long-term storage.
Folpan has activity but should not be applied until 30 days after petal fall to avoid russet.

We do not have a model for black rot infection but protection would need to be targeted prior to wetting and ideal weather conditions.

The fruit cuticle is sensitive to damage at this stage. Be cautious with spray mixtures (calcium, foliar nutrients) that could create an entry point for the pathogen.

Apple - Brooks Spot

Brooks spot is caused by a fungus that creates sunken, dark green lesions on the fruit. It is a minor disease that has been an issue on Honeycrisp in the past. The symptoms of Brooks Spot can resemble lenticel breakdown and bitter pit which are also common on Honeycrisp. Include a product for cover sprays that is labelled for brooks spot such as Inspire Super or Aprovia Top (or Folpan 30 days after petal fall).

Apple - Flyspeck and Sooty Blotch

These summer diseases develop on the surface of the fruit in midsummer until harvest. They are caused by fungi that overwinter in dead twigs and the fungi tend to cause more infections under conditions of moderate temperature, high humidity and rainfall. Usually this disease is associated with lack of fungicide residues from long fungicide reapplication intervals. Include a product for cover sprays that is labelled for flyspeck and sooty blotch such as Captan, Maestro, Inspire Super, Aprovia Top, Cevya, Allegro, Pristine, and Merivon (or Folpan 30 days after petal fall). Summer diseases such as flyspeck are a risk if spray programs are stretched beyond the limit.

Insects

Apple and Pear: Codling Moth

Degree Day and Treatment Timing Predictions

We are very grateful for the regional biofix dates set by Erika Bent, APM. The biofix dates for this season are June 13 for most regions and June 15 for late regions.

Suzanne Blatt, AAFC, has run the degree day model today to predict when degree day thresholds will be met for treatments. The models were run on Tuesday, June 30 with a degree day threshold of 10 degrees (C) using Kentville weather station data.

Codling Moth Treatment with Egg Hatch Products
Products: Assail, Delegate, Intrepid, Altacor, and Exirel
Timing: The treatment timing for egg hatch products is 100 degree days Celsius from biofix.

Prediction: The 100 degree day threshold was reached in early regions by June 27. Late regions reached the threshold on June 28.

Codling Moth Treatment with Organophosphate
Product: Imidan

Caution: All hand thinning activities must be completed prior to application. No hand thinning can occur on trees treated with Imidan.
Timing: Control of codling moth with Imidan is typically slightly later at 140 degree days after biofix.

Prediction: The 140 degree day threshold is expected in early regions by end of day July 1. Late regions by end of day July 2.

Recommendations:

Monitor the forecast for rain and do not apply treatment before heavy rain. Codling moth lay eggs that hatch over a period of time. Late application may miss the first egg hatch and could result in a few codling moth entries but will still provide residual activity for future egg hatches.
If trap captures are below the treatment threshold but continue to build over time then treatment should be applied once a threshold is reached. When the time for apple maggot treatments arrives, the chemistries will also treat late codling moth.
The neonicotinoid insecticides (group 4 products) move into plant tissues over a period of about 24 hours. If it rains before the product is absorbed, the product on the surface is susceptible to wash off.
Imidan does not penetrate leaf tissue so it is a surface material that is susceptible to wash off under rainy conditions.
Approximately a week after application of Imidan, clean out the trap and start monitoring the trap. The capture of an additional 10 or more moths would indicate that a second treatment is required.

Apple Maggot

The Apple Efficacy Guide may be used to compare the products that are registered for control or suppression of codling moth and/or apple maggot. Note that high label rates are often needed for activity on apple maggot.
In blocks that are being treated for codling moth, the control is extended to early maggot flies.
The economic threshold is 1 maggot fly per orchard on a yellow sticky board (Figure 3).

Apply a conventional treatment 7-10 days after the first fly is captured on a yellow sticky board or immediately after a female is captured on a red sphere.
In organic orchards, Surround can be used to deter egg laying and GF 120 fruit fly bait can be used for suppression of adult flies. Both Surround and GF 120 should begin to be applied immediately as flies become present in the orchard.
Clean maggot traps 7 to 10 days after treating a block for maggot and monitor for new trap captures. Retreat if new maggot flies are caught.

Flies emerge over a period of time so for satisfactory maggot control, monitor the presence of apple maggot flies to inform treatment programs. Remember, a single female can lay hundreds of eggs so do not stop treatment prematurely.
Significant rainfall will wash off insecticide residues that are needed to ward off apple maggot flies. Re-treatment is required after 10-14 days or cumulative rainfall of 12.5-25 mm (0.5-1 inch). Danitol and products registered for suppression are expected to have a relatively shorter field residual life of 7-10 days. Insecticide residue should be maintained through to the end of August.
Chemical groups 5 and 28 target adult flies to prevents stings. Chemical groups 1 and 4 have activity on adults, eggs, and larvae meaning that they prevent stings and if an egg is laid the products also prevent survival of the larvae.
Sanitation through removing wild apple trees can help to prevent the buildup of populations that will migrate into orchards from the orchard perimeter.
Apple maggot flies are weak flyers so a border/perimeter spray of Imidan near known hotspots may be an approach to help kill adult flies from the source. (Being cognizant of the 22-day PHI and REI restrictions).
Apple maggots pupate in the soil and may not emerge until up to four years later. Therefore, several years of diligent management are required to reduce the resident insect population.

Figure 3: An apple maggot fly on a 1 x 1 inch grid of a yellow sticky trap. The fly has a black F-shaped pattern on the wing that mimic's the shape of a spider's legs. It is slightly smaller than a common house fly and has a white dot in the middle of its back.

Apple - Sucking Insects

Aphids:

Monitor for aphids in young trees and nursery plantings where feeding can disrupt shoot growth. If leaves are curling, high water volumes are needed for effectiveness. Green aphid will move back into orchards that were treated previously so continue to monitor. Assail also has activity on codling moth, apple maggot and leafhoppers. Be cognizant of REIs if installing trellis.

Mites:

European red mite, two spotted spider mite and apple rust mite are the prominent species that affect apple trees. Although not directly damaging to the fruit, these mites in all their motile life stages can drain the nutrients from the trees and dramatically degrade fruit quality.

Scout your orchards or check your scouting reports to see if there is a treatable population. Those growers with a consultant will receive the most accurate information because mite counts are done using a specialized machine for brushing and beneficial predators are noted as well.
In a hot and dry year, mite populations can double in 7-10 days.
Good spray coverage is critical.
Mites have many generations per year and therefore have a high potential to develop resistance. For resistance management, it is critical to rotate miticide classes.
July is the time of year to control rust mite before foliage becomes bronzed in mid to late August.
All miticides are effective on European red mite and two-spotted spider mite but only products Nexter, Envidor, and Magister provide control of rust mite.

Envidor is slow acting so it requires early intervention.
Acramite, Kanemite, Nealta, and Nexter provide quick knockdown.

Potato leafhopper: Feeds on the young leaves of terminal shoots leading to yellowing at leaf edges, and cupping that will eventually turn brown. Adults are pale yellow-green and walk sideways whereas the white apple leafhopper is white and moves forward and back. Monitor your scouting reports or updates.

Potato leafhoppers can transmit fire blight. Their presence in young plantings and nurseries is concerning, especially in areas of active fire blight infections. Insecticides labelled for leafhoppers are the group 4 products and they include Assail/Aceta, Cormoran, and Sivanto Prime.

Scale Crawlers

If you had scale last year at the packout then they should still be monitored even if an oil application was used in spring.
The scale that are under a waxy coating at this time of year are the adults that are about to give birth to live young. Those live young are the crawlers that leave the waxy coating and become susceptible to insecticides. Typically the crawlers are active in July at about 4-6 weeks post-bloom and with the heat this year they could be on the move early.
Monitor for activity by using traps that are made by using black electrical tape (with adhesive side out) around the scaffold limbs of trees, in areas with known infestations. Crawlers yellow bodies will be caught on the tape when they become active.
When the crawlers are active, Movento with a surfactant is one of the most effective products. The neonicotinoid products Assail/Aceta and Closer may also affect crawlers.

Obliquebanded Leafroller

Monitor or check scouting reports for larval populations. The caterpillar feeds on terminal shoot growth and also on apples, leaving a scar.

Pear Insects

Pear Psylla: Refer to the management guide for product options.
Pear rust mite: Pear rust mite can go unnoticed until heavy russeting extending from the base to the top of the fruit. Growers that apply Agri-mek for pear psylla control would also obtain pear rust mite control. Nexter or Envidor would be other options for pear rust mite control.
Codling moth: Refer to the above information for apples.

Horticulture

Symptoms of Minor Leaf Injury from New Thinners Brevis and Accede

There is no concern for tree health based on the symptoms that are observed (Figure 4).
The main point I want to make is to recognize the symptoms and realize what caused them so the symptoms are not mistakenly attributed to something else.
Brevis can cause leaf necrosis. The leaves damaged in this example are Honeycrisp at the 5-6 leaf position that would have been young leaves at the time of application.
Accede can cause minor leaf yellowing and drop. It is only obvious on the tree row below the tree.

Figure 4: The new thinners Brevis and Accede cause minor leaf injury that is not a concern to tree health.

Be familiar with the signs so as not to attribute it to something else.

Scion Rooting as Rescue Option for Weak Plantings

For whatever reason, sometimes a planting can be weak and fail to fill its space. Maybe trees have been exposed to environmental stressors or maybe the dwarfing rootstock was too small to begin with. Maybe frost heaving exposed more of the rootstock shank. In these situations, trees that scion root are generally the healthiest.

Past local experience has shown that scion rooting can be a management option for weak plantings that fail to fill their space or struggle to thrive. Where scion rooting was used in the past on a weak block, the grower says they wouldn't hesitate to do it again.

For some there might be the concern of too much vigour from scion rooting. After covering the graft union, it took the trees about 5 years to set strong scion roots to become vigorous. Given the short lifespan of orchards there isn't much concern about trees in this situation getting too big. If to much vigour result, then management practices like summer pruning, apogee, and root pruning can keep the vigour in check.

On-Farm Nursery

Scion leaders need support. Stakes should be placed on the side opposite from the bud so it pulls the bud toward the rootstock rather than away.
Monitor for green aphids.
Remember the importance of weed control in nurseries. Management practices now will impact the outcome of the final tree. Encourage the growing point to be successful!
Budding

As August approaches, find a source of bud wood that does not have a history of fire blight strikes. Trees that have shown signs of fire blight strikes or that are situated near fire blight infections should be eliminated as a source of bud wood. Cut bud wood fresh every morning if possible.
Occasionally sanitize all tools used for bud wood collection, storage, and budding by washing in detergent and water and disinfecting with sodium hypochlorite bleach. During bud wood collection and budding, frequently spray hand tools with fresh sodium hypochlorite bleach solution, diluted one part to nine of water.

If bleach is too tough on tools, Lysol and Pinesol at one part product to ten parts of water are good alternatives. Do NOT use rubbing alcohol because even at 70% to 99% concentration it allows bacteria to survive (California Agriculture 1991).

It is highly recommended that you water your nursery before and after budding to encourage callus formation and a healthy union.
The vigorous Geneva rootstocks can fail to accept tbuds, and other propagation approaches like chip budding and bench grafting are recommended. In several situations now, tbudding G969 has resulted in failed bud unions. What appears to happen is that the Geneva rootstock overwhelms the tbud with excessive callus formation (Figure 5).

Figure 5: Two different on-farm nursery situations where t-budding Honeycrisp on G969 failed in 2018 and 2025 due to excessive callus formation and an overly vigorous rootstock.

Tree Health

Top dressing is not recommended after the end of June. Late release and uptake will prevent trees from hardening off before the winter.
Around July the trees are storing reserves in the roots for next year’s growth. When they are storing reserves, late glyphosate applications can be damaging if taken up by root suckers and transported to the root system. Avoid the risk by avoiding glyphosate applications after the end of June.

Nutrition

Calcium:

The goal of foliar Ca sprays is to increase the concentration of Ca in the fruit and reduce the incidence of bitter bit. Begin calcium applications at 4 to 6 weeks after petal fall when fruit have reached the golfball stage at around 35 mm. Calcium applied at two-week intervals is better than occasional, high-rate applications.
Ca has very low movement within the tree and needs to be applied directly to the fruit surface to be absorbed. Therefore, thorough coverage is important to cover developing fruit.
The recommended rate is 4.5 to 15.5 kg elemental calcium per ha (4 to 14 lbs of elemental calcium per acre) over an entire season spread over six to eight cover sprays.

Low rates will not cause leaf burn but will likely lead to only minor control of bitter pit and likely will not enhance storage life of the fruit.
High rates may lead to some leaf burn, give good control of bitter pit, and may also enhance storage life of the fruit.
Determine how much elemental calcium you would like to apply over a season and then work backwards to determine the required number of sprays.

Calcium chloride flake (77% CaCl2) is the most economical Ca material to use but also the highest risk for foliar burn. Calcium chloride flake has a low risk of leaf burn when applied at the standard rate of 4.5 kg per 1000 L of water/ha (4 lbs/100 gal/ac).

Calcium chloride flake is 77% calcium chloride which is composed of one calcium and two chloride molecules. According to the weight of the molecules the calcium portion represents about 28% of the total weight. Therefore, our calcium chloride flake contains 28% elemental calcium.
For each spray at the standard rate of 4.5 kg per 1000 L/ha, the 28% portion that is elemental calcium is 1.3 kg/ha (1.1 lbs elemental calcium per acre).
The risk of leaf or fruit damage from calcium is highest in hot weather. Susceptible varieties can develop lenticel spotting if damaged. Target fast drying conditions for applications.

Risk of leaf injury may be enhanced by Captan. Incompatibility has been observed with Epsom salts, and liquid or emulsifiable pesticide formulations in some cases. Do not apply calcium with Apogee/Kudos. Note that nutrient product formulations with calcium may contain boron that would interact poorly with water soluble packaging.

Suckers

Remove woody suckers by cutting or ripping to avoid resource competition, the risk of systemic herbicide uptake, harbouring pests like fire blight shoot blight.
If suckers are more prevalent because of exposed roots due to frost heaving, try to hill the soil to cover the roots.

Mowing

As grass becomes long the extra surface area increases transpiration. Keep grass mowed to conserve moisture.
Keeping the orchard floor cover mowed pre-bloom will minimize flowers that attract bees, which increases the safety of post-bloom insecticide applications.
Mowing and herbicide strips help to prevent issues with two-spotted spider mite (John Michael Hardman).

Pruning and Training

Select strong terminals on young trees and remove competing terminals to single the tops if there are no re-entry intervals active and before the shoots get woody.
Ensure that deer fencing is installed as soon as possible to protect new growth on young trees.
Newly planted trees should be pruned for tree structure and supported as early as possible after planting. Prioritize trees that are known to be brittle at the union, including many of the new Geneva rootstocks (G.11, G.41, G.16 etc).

Cover Crops

Perennia has a series of videos about cover crops that can be accessed from our website.
Summer grasses such as pearl millet and sorghum-sudangrass that have been a popular choice can be planted from mid-June until early August.
For August and September plantings of cover crops, check out the factsheet about Fall Cover Crop Species Selection and Management that was written by Sonny Murray and Caitlin Congdon.

Summer Hedging

A local study by Perennia in 2013 evaluated the regrowth on summer hedging using Ambrosia on M.9 and Gala. Results indicate that the last week of June = 6 to 21 cm of regrowth, first week of July = 4 to 12 cm of regrowth, and second week of July = 2 to 3 cm of regrowth. No regrowth is expected after terminal bud set around the first week of August although it was not included in the trial.
On vigorous trees, delay summer pruning until terminal buds have been set on vegetative shoots. Pruning prior to this on vigorous trees can promote bud break and weak shoot growth.

Events and Notices

Save the Date - NSFGA Summer Tour August 5

The 2026 NSFGA Summer Orchard tour will be held on Wednesday, August 5. Events like this are only possible through sponsorship. Contact NSFGA for sponsorship opportunities.

Pest Management Guide

We offer printable PDFs of the guides from our website:

Online pest guides are also available without login (https://www.perennia.ca/pest-guides/) and with login on your Perennia account (https://www.farmdatatools.perennia.ca/). Using the online tool you can filter for organic and conventional options, search for key information, and sort based on information of interest.

This Orchard Outlook has been published with the input of the Orchard Outlook Committee including this week's participants: Harrison Wright, Joan Hebb, Danny Davison, Ian Willick, and Suzanne Blatt.

Written by Michelle Cortens, Tree Fruit Specialist
Perennia Food and Agriculture Corp.

Pages

Orchard Outlook Newsletter Vol. 26, No 12

Tuesday, June 30, 2026

Table of Contents:

Weather

2026 Degree Day Accumulations

2026 Precipitation Update

Recommendations:

Diseases

Apple – Scab

Recommendations:

Apple – Powdery Mildew

Recommendations:

Fire Blight Infection Management

Recommendations:

Apple – Black Rot

Recommendations:

Apple - Brooks Spot

Apple - Flyspeck and Sooty Blotch

Insects

Apple and Pear: Codling Moth

Recommendations:

Apple Maggot

Apple - Sucking Insects

Scale Crawlers

Obliquebanded Leafroller

Pear Insects

Horticulture

Symptoms of Minor Leaf Injury from New Thinners Brevis and Accede

Scion Rooting as Rescue Option for Weak Plantings

On-Farm Nursery

Tree Health

Nutrition

Suckers

Mowing

Pruning and Training

Cover Crops

Summer Hedging

Events and Notices

Save the Date - NSFGA Summer Tour August 5

Pest Management Guide

Blog Archive